Markham Forklift Training Program

Markham Forklift Training Program - The forklift is a common powered industrial vehicle that is in wide use today. They are occasionally known as jitneys, hi los or lift trucks. A departments store would make use of the forklift to unload and load products, whilst warehouses would use them to stack materials and products. And grocery stores use small models to drop stock in the aisles. Whether transporting lumber at a sawmill or loading material at a construction site, operators of forklifts are required to be trained properly and licensed. The main concern must be on the safety of the worker and pedestrian. This forklift training program teaches the health and safety regulations governing forklifts in order to ensure their efficient and safe operation.

Forklift Training Program Safety Tips:

Forklift training programs are meant to guarantee that the operator could control the forklift safely throughout traveling, lifting and tilting. Just qualified operators must drive a forklift.

When the forklift is in operation; hands, head, arms, legs and feet should be kept in the forklift. Lift truck forks should be kept low to the ground while being slightly tilted back. Observe posted traffic signs. Honk the horn and decrease speed if taking a corner. If the vision of the driver is blocked by the load, slowly drive in reverse. Pre-check the ground for potential dangers, like wet or oily spots, objects, holes, rough patches, people and vehicles. Prevent stopping immediately.

If a person or vehicle crosses the lift truck's blind spot, stop the truck, lower the load, and do not continue until the path is clear. When traveling on an incline, the forks should be pointed downhill without a load and uphill with a load. The lift truck should only be turned around when on level ground.

Safety guidelines while steering - When traveling at good speeds, never turn the steering wheel sharply. Support the load with the front wheels and turn using the rear wheels. An overloaded truck will be difficult to steer. Adhere to load limits. Do not add a counterweight as a way to improve steering.

Safety guidelines while loading - The forklift's suggested load capacities should be adhered to; the information could be found on the data plate. Always ensure that the load is positioned based on the recommended load centre. The lift truck would remain steady so long as the load is kept close to the front wheels.

The forklift mast should be in an upright position before inserting the fork into a pallet. Before inserting the fork, level it.

Click to Download the pdf